Up to 80 simultaneous channels Wireless Microphone Equipped with both XLR and 6.3mm
Receiver Parameter
| Main Frame Size | EIA-Standard 19" 1U |
| Channels | Dual Channel |
| Frequency Stability | ±0.005%, Phase Lock Loop frequency control |
| Carrier Frequency Range | UHF 510-937 MHz ( country dependent ) |
| Preset Channels | 32 preset channels |
| Operating Range | 90M typical ( in open space) |
| Oscillation | PLL synthesized |
| Sensitivity | 6dBμV, S/N>60dB at 25 deviation |
| Band Width | 30MHz |
| Max. Deviation Range | ±45KHz |
| S/N | ＞105dB |
| T.H.D. | ＜0.7% @ 1KHz |
| Frequency response | 45Hz～18KHz±1dB |
| Squelch | “PiloTone & NoiseLock” dual-squelch circuit |
| Power Supply | 100-240V/AC50/60 Hz, 10W |
| Weight | 2.7KG |
| Dimension | 482(W) X 454(H) X 186(D) (mm) |
| Output Connector | XLR balanced & 6.3φ phone jack unbalanced |
Transmitter Parameter (Handheld)
| Carrier Frequency Range | UHF 510-937 MHz ( country dependent ) |
| Oscillation | PLL synthesized |
| Harmonic radiation | ＜-63dBm |
| Bandwidth | 120MHz |
| Max. Deviation Range | ±45KHz |
| Input Connector | 4-pin mini-XLR connector |
| RF Power Output | 3～30mW ( country dependent ) |
| Battery | AA X 1 alkaline |
| Current Consumption | 60mA, typical |
| Battery Current / Life | Min. 10 hours |
| Dimension | 72(H) X 68(W) X 21(D) (mm) |
| Weight | 71g ( w/o battery) |
Receiver Features
· Rugged metal chassis with soft-touch controls.
· (Chinese / English) bilingual menu operation;
· Up to 80 simultaneous channels;
· Handheld or bodypack transmitter can be switched freely for each channel;
· True diversity provides the most effective elimination of dropouts.
· Pilot tone squelch for eliminating RF interference when transmitter is turned off.
· Enhanced AF frequency range
· Built-in spectrum analyzer to auto scan and select a clear channel.
· Transmitter Sync.
· Pure aluminum alloy side plate design.
· 600 selectable frequencies, 32 preset clean channels
· OLED display screen delivers a bright, clear viewing in day/night environments.
· Equipped with both XLR balanced and Ø6.3mm unbalanced outputs.
· Offers an exceptional value in both performance and price, for both working musicians and sound installers.
Transmitter Features
· All rugged metal die-cast construction.
· The microphone head is sperate to change other brand microphone head if needed
· 120MHz ultra-wide bandwidth.
· Array antenna design for signal stability.
· Extremely low handling noise.
· Infrared automatic transmitter sync.
· Very easy and quick to use thanks to OLED display
· 2 x AA batteries – up to 10 hours continue use.
Products Supply Scope
- Handheld system: 1* AM 500 receiver + 2* AH 500 handheld microphones
- Lavalier system: 1* AM 500 receiver + 2* AP 500 bodypack transmitters with lavelier microphone
- Headset system: 1* AM 500 receiver + 2* AP 500 bodypack transmitters with headset microphone
- 1 power supply unit
- 2 antennas
- 1 ¼” (6.3 mm) audio connecting cable
- 4 AA size batteries
- Operating instructions.
Application
Suitable for Large-scale performances ,small and medium-sized performances, outdoor singing and speeches, KTV boxes, classrooms, gymnasiums, offices and government agencies
Welcome to our company ,a one-stop solution for your Microphone business
It has the characteristics of falling resistance and impact resistance
The use of microphone will inevitably lead to failure or abnormality due to accidental drop and collision. Because the capacitive sound head is composed of light plastic parts and solid light metal shell, the impact force falling to the ground is small and the failure rate of damage is low.
Small volume and light weight
Because of the ultra-thin diaphragm, the condenser microphone has the characteristics of small volume, light weight, high sensitivity and superior frequency response, so it can be designed into an ultra-small microphone (commonly known as little bee and little ant) for wide applicationBest fit on wireless microphone
Product Tags:
|
|
80 Simultaneous Channels UHF Wireless Microphone With XLR And 6.3mm Jack Images
|
